PHRE 1041 – Principles of Fitness

This course focuses on learning body weight exercises that target the fundamental human movements:

  • Pushing
  • Pulling
  • Squatting
  • Lunging
  • Hinging
  • Gait
As well, various exercises to target functions of the core (stabilization, rotation, flexion, extension) will be covered.

Lab Competencies
[su_table responsive="yes"]
Competency Teaching points (The value of each point can be found at the end of each line.)
Goblet Squat + Bird Dog
  1. Instruct client to stand with feet approximately shoulder width apart, toes pointed slightly out. | 1
  2. Discuss the importance of maintaining as erect a torso as possible (neutral spine) throughout the movement. | 1
  3. Instruct client to keep knees aligned with toes (knees don't collapse in) | 1
  4. Discuss target ROM (squat until knees are bent below 90 degrees) | 1
  5. Cue client to keep weight back (e.g.: weight over ankles or more towards heels than toes) | 1
  6. Client completes at least 10 reps. | 1
  7. Screen pain/discomfort during squat. | 1
  8. Offer client the option to use a mat | 1
  9. Explain and cue engaging the core, keeping pelvis stable | 1
  10. Instruct and verify client can fully extend a single leg (while maintaining neutral spine) | 1
  11. Instruct and verify client can fully extend a single arm (while maintaining neutral spine) | 1
  12. Instruct and verify client can fully extend the opposing arm-leg, hold for ~2 seconds | 1
  13. Perform 6-8 reps per side | 1
  14. Screen pain/discomfort during bird-dog | 1
  15. Explain a stretch appropriate for a novice client that targets the muscles trained in the squat. | 1
Split Squat + Push-Up
  1. Determine a stance length/width that should allow the client to be balanced. | 1
  2. Mention the importance of maintaining as erect a torso as possible (neutral spine) throughout the movement. | 1
  3. Explain target range-of-motion (i.e. knees form a 90˚angle at the bottom of the movement.) | 1
  4. Cue client to push off through the heel of the lead leg | 1
  5. Complete 8-10 reps per leg | 1
  6. Screen pain/discomfort during split squat | 1
  7. Offer client the option to use a mat | 1
  8. Have client assume a prone position (lying face down) on the floor with the legs fully extended and the toes pointed down to the floor. | 1
  9. Cue your client to keep the core engaged (torso should remain in a straight line; neutral spine) | 1
  10. Have client place their hands on the floor, palms down, ~ 1 to 3 inches wider than shoulder-width apart with the elbows pointed outward. | 1
  11. Explain the impact of moving hands closer in/further away from shoulder-width | 1
  12. Have client push (i.e. fully extend the elbows), then lower the body by allowing the elbows to flex to a 90° angle (or a position where the chest is hovering 1-2″ above the ground) | 1
  13. Complete at least 10 reps | 1
  14. Screen pain/discomfort during push-up | 1
  15. Explain a stretch appropriate for a novice client that targets the muscles trained in the split squat. | 1
Hip Bridging + Plank
  1. Offer client option to use a mat | 1
  2. Have client lie on their back, feet planted on the floor. Arms at sides for balance | 1
  3. Explain that movement involves client thrusting hips forward to full extension by pushing off heels and contracting glutes | 1
  4. Watch client demonstrate movement, helping client achieve full extension, if necessary | 1
  5. Complete at least 10 reps | 1
  6. Screen pain/discomfort during bridge | 1
  7. Demonstrate/teach progression to 1-leg bridge | 1
  8. Again, offer client the option to use a mat | 1
  9. Mention the importance of maintaining as erect a torso as possible (neutral spine) throughout the movement | 1
  10. In a prone position, have client brace against forearms, with elbows positioned under the shoulders, legs fully extended and the toes pointed down to the floor | 1
  11. Explain and cue engaging the core | 1
  12. Instruct the client to raise body upward until body is help in a straight line | 1
  13. Have client attempt to hold position for at least 30 seconds | 1
  14. Screening of pain/discomfort during plank | 1
  15. Explain a stretch appropriate for a novice client that targets the muscles used in the hip bridge | 1
Inverted Row + McGill Crunch
  1. Position a bar in a rack to a height that will allow client to extend arms without lying on the floor | 1
  2. Using a slightly wider than shoulder width grip (hands pronated), have client hang underneath the bar | 1
  3. Client’s body should be straight (neutral spine) with heels on the ground with their arms fully extended | 1
  4. Instruct the client to initiate movement by flexing the elbow, pulling their chest towards the bar. Pause then return to starting position | 1
  5. Complete at least 10 reps | 1
  6. Screening pain/discomfort during row | 1
  7. Offer your client a mat | 1
  8. Have client lie on their back on the floor with one leg extended straight and flat on the floor, the knee of the opposite leg should be bent and the foot flat | 1
  9. Explain to client the desired range-of-motion and target muscle activation | 1
  10. Have client place their hands hands palms down on the floor underneath the natural arch in their lower back | 1
  11. Have client slowly raise their head and shoulders off the floor without bending the lower back or spine | 1
  12. Hold this position for 7 to 10 seconds, then lower torso back to mat | 1
  13. Complete 3-5 repetitions | 1
  14. Screening pain/discomfort during crunch | 1
  15. Explain a stretch appropriate for a novice client that targets the muscles used in the row | 1
Walking Lunge
  1. Screen unloaded split squat mechanics on flat surface | 1
  2. Review stance and establish comfortable width | 1
  3. Discuss knee tracking and optimal range-of-motion | 1
  4. Discuss neutral spine and need for core stability | 1
  5. Establish non-dominant leg, cue client to start with that side | 1
  6. Stay in client line-of-sight while they move | 1
  7. Have client demonstrate unloaded walking lunge at least 8 reps (both legs) | 1
  8. Screen pain/discomfort | 1
  9. Establish effective working load, have client pick up the weight, get into position | 1
  10. Have client complete additional 8 reps (both legs) | 2
  11. Re-screen pain/discomfort | 1
  12. Include teaching point | 1
  13. Include teaching point | 1
  14. Include teaching point | 1
Seated Dumbbell Shoulder Press
  1. Set bench to proper position | 1
  2. Discuss neutral spine and proper posture | 1
  3. Explain how to get weights into start position | 1
  4. Discuss impact of grip (pronated vs. neutral) | 1
  5. Discuss optimal range-of-motion/not banging weights | 1
  6. Review safe spotting | 1
  7. Establish a warm-up load, have client complete at least 8 reps | 1
  8. Screen pain/discomfort | 1
  9. Establish effective working load, assist client getting weights into position | 1
  10. Have client complete additional 8-12 reps | 1
  11. Demonstrate proper spotting technique | 1
  12. Re-screen pain/discomfort | 1
  13. Include teaching point | 1
  14. Include teaching point | 1
  15. Include teaching point | 1
Seated Row
  1. Discuss neutral spine/proper posture | 1
  2. Review various grips (pronated vs. neutral vs. supinated) | 1
  3. Discuss impact of legs in retrieving/returning the handle | 1
  4. Discuss optimal range-of-motion | 1
  5. Discuss limiting momentum | 1
  6. Choose appropriate handle/grip | 1
  7. Establish a warm-up load, have client complete at least 8 reps | 1
  8. Ensure client is activating rhomboids/posterior deltoids and not just using biceps | 1
  9. Screen pain/discomfort | 1
  10. Establish effective working load, ensure client safely gets handle into position | 1
  11. Have client complete additional 8-12 reps | 1
  12. Re-screen pain/discomfort | 1
  13. Include teaching point | 1
  14. Include teaching point | 1
  15. Include teaching point | 1
Lat Pulldown
  1. Install bar safely | 1
  2. Ensure knee pad installed at correct height | 1
  3. Review proper posture/torso alignment | 1
  4. Discuss various grips (pronated vs. neutral vs. supinated) | 1
  5. Discuss limiting momentum | 1
  6. Review optimal range-of-motion | 1
  7. Establish a warm-up load, have client complete at least 8 reps | 1
  8. Ensure client is activating lats and not just using biceps | 1
  9. Screen pain/discomfort | 1
  10. Establish effective working load, have client complete additional 8-12 reps | 1
  11. Re-screen pain/discomfort | 1
  12. Remove bar safely | 1
  13. Include teaching point | 1
  14. Include teaching point | 1
  15. Include teaching point | 1
Lab 7 Practice Video
  1. Check this box | 5
  2. Do not check this box | 5
  3. Also check this box | 5
[/su_table]
View Lab Exam Feedback
No completed lab exam rubrics currently available
Lab Schedule
Course: PHRE 3043 - Functional MovementMovement Pattern: Core | stabilization, Whole BodyTarget: Synergist(s):
Exercise
Regressions:Progressions:

Key Teaching PointsExpectation: [if 456 equals="Supervised Practice"]Supervised Practice [/if 456][if 456 not_equal="Supervised Practice"]Independent Learning[/if 456][579]
Description:

Set up verbal instructions:

  • Get down on your hands and knees straddling the board with your thumbs, knees and toes touching the
  • Your hands are under your shoulders and your knees are under your hips with your toes pointing
  • At the same time, in one smooth and controlled motion, shift and lift the same side arm and leg.
  • Without touching down, reach back with your hand and touch the outside of the ankle.
  • Then extend that same side leg backward and arm forward, fully extending knee and elbow.
  • Finally reach back to touch the ankle with the hand again, and then return to the starting position.
  • Perform this pattern while keeping the arm and leg moving in-line with board.

 

 

Tips for teaching:

  1. Inability to complete the pattern would indicate that they lost balance, could not perform without making contact with the test kit, or could not get into setup position. This results in Score of 1.
  2. The foot, knee and thumbs should be in contact with the board to establish the start position. While shifting to complete the movement pattern, the foot and knee may slightly lose contact with board, but foot and knee start position on the ground should not change. Although they may lose contact, they should not roll away from board to the point that the placement of their hand, knee or foot changes on the ground.
  3. Loss of balance: Touching hand or foot down after the initial lift from the ground at any point before completing the pattern.

Scoring:

3:

  • Hand and knee leave ground at the same time. Ability to perform this patter while keeping the arm and leg moving in-line and parallel with the board. Fingers touch the lateral malleolus. Knee and elbow achieve full extension.

2:

  • Hand and knee did not leave the ground at the same time. Inability to keep the arm and leg moving in-line. Fingers touch the lateral malleolus. Knee and elbow achieve full extension.

1:

  • Loss of balance. Hand does not touch the lateral malleolus. Knee and elbow do not fully extend. Inability to get into set-up position.

0:

  • Pain

Clearing Test:

  • Get into the same start position with feet pointed backwards, and rock your hips toward your heels
  • Lower your chest to your knees, and reach your hands in front of your body as far as possible
  • Ask client, do you feel any pain?
Common Error(s):
Spotting:
>> Return to My Course Home |